vtp domain CCNA |
selects the domain for the network
|
vtp mode server / client |
sets the mode of the device
|
vtp password cisco |
passwords for the vtp domain
|
show vtp status |
verification command for vtp
|
vtp mode transparent |
set a device into transparent mode
|
|
Configure LACP between two switch
|
|
switchport mode trunk |
in a interface range
|
switchport trunk native vlan 99 |
set native vlan
|
channel-group 2 mode active / passive |
set ports as active. on one switch active and on the other passive. commands above are the same on both switch
|
vlan 10 |
create vlan with the number 10
|
name Management |
assign name to the previously created vlan
|
show vlan brief |
verify vlans
|
switchport mode access |
set an interface to access mode to join vlans
|
switchport access vlan 10 |
put interface into a vlan
|
switchport mode dynamic desirable |
create a dynamic trunk (you need to be in an interface to do this)
|
show interfaces trunk |
verify existing trunks
|
switchport mode trunk |
create a static trunk
|
switchport trunk native vlan 99 |
set the native vlan of a trunk
|
channel-group 1 mode desirable |
set a range of interfaces into desirable mode
|
channel-group 1 mode auto |
set a range of interfaces into auto mode
|
show run interface f0/3 |
verification command
|
show etherchannel summary |
show all etherchannels
|
show ip interface brief |
show overview of all interfaces
|
show ip route |
show all routes
|
show vlan brief |
show overview of all vlans and the ports in it
|
show interface trunk |
show all trunks
|
tracert [ip] |
show if hops to an ip are correct
|
No comments yet.
Cheatography n. The art of mapping complex subjects into clear, instantly navigable reference guides.
